Archive for the ‘faux finishes’ Category


Anti-graffiti is nothing new.  Graffiti itself has existed since ancient times, with examples dating back to the Roman Empire.  So you can bet there have been business owners looking for better ways to remove graffiti for thousands of years.  Today it can still be found in just about every city in the world – on walls, windows, transportation, and signs. 

Until fairly recently, there wasn’t much that could be done to protect signs or buildings from vandals – it was generally less a preventative measure than a reactionary one.  To remove graffiti from a sign, for example, without damaging the sign itself is a very difficult and costly undertaking.  However, with the development of anti-graffiti products such as protective films and specially sealed paints, the protective measures moved from reactionary to preventative. 

Several products have been developed to allow signage to be protected against paint, ink, and scratching.  We’ll outline a few of the basic products available that allow CNP Signs to offer better protection for your signage and keep the area they are installed in looking clean and inviting.

Anti-graffiti products can be placed into two basic categories – sacrificial and permanent.  Sacrificial products are perhaps the most common, as they can be applied to the signage after it’s been installed.  These provide a protective barrier, and once graffiti is applied, the product is removed leaving the sign clean.  The product is then re-applied.  These are available in films or sprays (like a clear coat), with films being the prevalent product on the market.  Films also protect against scribing (or scratching) and are very commonly found on glass.  While these are generally less expensive than permanent products, they can be more costly in the long run, as they need to be re-applied every time graffiti takes place.    

Permanent products are not as widely used (mostly due to higher up front cost), but are much more effective in the fight against graffiti.  These products are applied while the signage is being manufactured, and become an integral part of the sign face.  The clear coat dries hard, just like any other clear coat, sealing the surface.  When the sign is tagged (sprayed by a vandal), the paint doesn’t adhere as well as normal, which is the first deterrent.  If the “artist” continues and completes his “work”, once the spray paint (or marker, etc) is dried, it can be wiped clean with a simple solvent in most cases.  The coating remains, undamaged.  While the permanent products cost more up front, in the long run, they are often the better option. 

As CNP Signs and Graphics keeps step with the newest technology in the fight against graffiti, we’re not only keeping your signs clean, we’re helping keeping America clean.

Classic Beauty – Modern Materials

The U.S. Grant Hotel is listed on the National Register of Historic Places. It is one of the most distinctive buildings in the City of San Diego.

When the owners decided on a major renovation, they searched out the artistry of CNP Signs & Graphics for their traditionally-inspired primary signage. Street-level sign specifications called for large marble frames holding engraved and gilded panels. To create the perfect look without the incredible weight of marble, CNP tapped into the skill of their primary painters. Gold flake added depth to the fiberglass frames, and feathers were used to apply paint for the marble veins. The effect was classical beauty with a tenth of the weight.

Albert Einstein was once a guest of the U.S. Grant Hotel. He came up with the Theory of Relativity, but we think he would have been hard-pressed to think of a better signage solution for this unique San Diego landmark. If you need solutions to your signage conundrum, please give CNP Signs & Graphics a call.

Magic? No. Just the Paint Department.

What do you do when the client requests 300 lb. bronze letters hung from the ceiling?  You can either reinforce the ceiling, or you can make bronze weigh less.  CNP Signs & Graphics chose the latter for their work with Harrah’s Rincon resort, a Vegas-style casino and resort in San Diego, CA.

When Harrah’s originally contracted CNP Signs & Graphics to provide new signage for their buffet and café areas, the specifications called for deep, polished bronze letters attached to glass panels that hung from the ceiling.   Solid or cast bronze letters would be prohibitively heavy and cause safety concerns, so a modern marvel called Luminore was used by CNP to cut the weight to a fraction of the original specifications. 

Luminore  is the kind of product that gets CNP paint pros excited.  It’s a  metalizing system that allows us to apply a layer of real metal quickly and easily over almost any lightweight substrate or core material. The new metal veneer cures quickly, rendering a finished surface that is absolutely indistinguishable from solid metal.  This process works much like paint because it can be sprayed, brushed, etc.  The result is almost a perfect match to a solid metal or cast letter.

CNP Signs & Graphics is able to think outside the box, and come up with solutions using modern miracles in bottle like Luminore to produce stunning results for its customers.